Trailer Leaf Spring Components

Shackle shoe for use with double eye leaf springs - weld on or bolt on

Brass bush used in the eye of the double-eye leaf springs. Length = 2" (50.8mm) Outer diametre = ¾" (19.05mm) Internal diametre = 5/8" (15.875 mm)

Plain shackle bolt c/w grease nipple and nut - 3¼" long. Used through the outer holes of the centre balance beam to fix the eye of the leaf spring on tandem set up.

Plain shackle bolt c/w grease nipple and nut - 4" long. Used in the middle of the centre balance beam on tandem spring set up.

Swinging link for use with double eye leaf springs - connects the shackle shoe with the eye of the leaf spring at the rear (in single set-up) and on the outer eyes (in tandem set-up).

Centre hanger shoe to suit centre balance beams - double eye and slipper type. Weld on

Stepped shackle bolt c/w grease nipple and nut. Overall length = 93mm (excluding grease nipple) - Thread = ½" x 25mm - Plain shank length = 57mm

Centre balance beam fabricated for use with double-eye leaf springs in a tandem set up.

Securing bolt c/w nut for the bushed eye end on a slipper leaf spring. Overall length = 100mm - Thread length = 45mm - Plain shank length = 45mm Thread = 16mm

Plain shackle bolt c/w grease nipple and nut - 4" long. Used in the middle of the centre balance beam on tandem spring set up.

Centre hanger shoe to suit centre balance beams - double eye and slipper type. Weld on

Shackle shoe for the slipper end of slipper leaf springs - weld on.

Centre balance beam for use with slipper-end leaf springs in a tandem set up.

1 hole plate/spacer to suit double-eye or slipper end leaf springs

Plated steel 'U' bolt c/w self-locking nuts to suit 40mm square solid beam axle.

Plated steel 'U' bolt c/w self-locking nuts to suit 45mm square solid beam axle.

5 hole plate to suit 40mm square solid beam axle - used with u-bolts

5 hole plate to suit 45mm square solid beam axle - used with u-bolts